Shuttle Barebone DH110SE
Shuttle DH110SE to mała wytrzymała obudowa. Obsługuje procesory Intel na podstawce LGA1151 i nazwie kodowej "Skylake". Pozwala na pracę na dwóch monitorach jednocześnie w temperaturze do 50stC. Barebone jest zaprojektowany do pracy ze specjalizowanym oprogramowaniem przemysłowym, POS itp. DH110SE obsługuje pamięci DDR4.
If because of space constraints the machine cannot be switched on by pressing the front power button, it can be started with a separate remote control. You will find an appropriate four-pin connector on the back panel of the PC (pitch 2.54 mm).
The DisplayPort connector allows for connections with digital high-resolution displays. Depending on processor and display model resolutions of up to 4K/Ultra HD (3840x2160) can be achieved. Besides picture signal, DisplayPort cables can also lead digital sounds signals in excellent quality.
This machine is provided with a hardware solution to keep it permanently switched on (e.g. after a power outage). If you remove the jumper documented in the manual, the PC then starts as soon as the power supply is restored.
Multiformat card reader
At last – no more searching for missing digital camera leads. Simply insert the memory card and you can access all stored photos and videos immediately.
Goodbye cable spaghetti! Modern flat-screen TVs and large-format TFT screens can be connected to this Mini-PC with just a single thin cable. Often the audio output is also transferred in brilliant quality via the HDMI cable.
Communication in the fast lane
The integrated gigabit LAN chipset opens up completely new possibilities for communication with no restriction on the speed of data transfer. Say goodbye to information bottlenecks, whether in the company network or for home Internet access.
The fastest connection to external peripheral devices available to date
The USB 3.0 connectors of this model allow for data transfer of up to 5 Gbit/s (625 MB/s). This enables external devices such as USB hard disks to be connected and run at nearly the same speed as their internal siblings. USB 3.0 is downward compatible so that also devices of previous USB generations can be hooked up.
Pre-assembled cabling saves time
The most important power and data cables are already routed and just have to inserted into the relevant components. This saves valuable time when setting up the system.
Intel chipset inside
Play it safe with the reliable chipsets from the world's largest chip manufacturer. Intel chipsets have proven themselves over many years, have been presented with awards by the trade press and offer the best possible degree of compatibility.
The Kensington Lock forms part of the anti-theft system. As with many other Notebooks, this Mini-PC can also be safely locked, ensuring long-term enjoyment from your Shuttle product.
You can rely on SSD
This is where an energy-saving "Solid State Drive" should be used. This drive technology guarantees extremely short access times, the highest data transmission rates and considerably lower energy consumption compared to conventional hard disks. SSDs have no mechanical components at all, are therefore subject to less wear and tear and consequently benefit from a longer service life.
Just 2.5" HDDs
An extremely compact PC housing offers less space for drives, that's why this Mini-PC uses slimline 2.5-inch hard disks. The advantage of this is that there's less noise, less heat generated and reduced power consumption. However small hard disks in a small housing does not have to mean less memory. Modern 2.5" HDDs are every bit as good as their 3.5" brothers.
Fan-less external power supply
A highly effective external power supply provides the Shuttle Mini-PC with its energy. And since it works without a fan, it is completely noise-free.
Optimal air flow
Warm air is transported out of the chassis by means of cleverly arranged components, which enables a large number of parts to be cooled simultaneously in the air flow. At no time can heat build up and adversely affect the stability of the system.
The interface for the fastest of memory media
Internal drives to be used inside this Mini-PC can transfer data at a speed of up to 6 Gbit/s. Hard drives thus run significantly faster and brand-new media technologies such as SSDs can use their full potential. Be sure to look for SATA 6 Gbit/s.
Nettop PC with black chassis made of steel
Dimensions: 190 x 165 x 43 mm (LWH) = 1.35 litre
Weight: 1.3 kg net and 2.1 kg gross
Two holes for Kensington Locks and numerous
threaded holes (M3) at both sides of the chassis
- Storage bay
1x 6.35 cm / 2.5" storage bay supports one hard disk or SSD drive
Device height: 12.5 mm (max.)
- Operation System
This system comes without operating system.
It is compatible with Windows 7 / 8.1 / 10, Linux - 64 bit only
- Mainboard / Chipset / BIOS
Chipset: Intel® H110 Chipset
(Intel® DH82H110 PCH, code name "Sunrise Point")
Platform Controller Hub (PCH) as Single-Chip-Solution
AMI BIOS in 8 Mbit EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure 
- Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, 4.74 A, max. 90 W
DC Connector: 5.5 / 2.5 mm (outer / inner diameter)
- Processor support
Socket LGA 1151 (H4) supports the sixth generation of
Intel Core i7 / i5 / i3, Pentium and Celeron processors
Maximum supported processor power consumption (TDP) = 65 W
Codename "Skylake", 14 nm process technology, up to 8 MB of L3 cache
Not compatible with Intel Xeon E3 V5 processors for socket LGA1151 and processors with the older Socket LGA 1150.
Does not support the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller
and the graphics engine on the same die (performance features
depending on processor type)
Please refer to the support list for detailed processor support information at global.shuttle.com.
- Processor cooling
Heat-pipe processor cooling with two 60 mm fans on the upper side of the chassis
- Memory support
2x 260-pin SO-DIMM slot
Supports DDR4-2133 (PC4-17000) SDRAM memory at 1.2 V
Supports Dual Channel mode
Supports max. 16 GB per DIMM, maximum total size of 32 GB
Supports two unbuffered DIMM modules (no ECC)
- Integrated Graphics
The features of the integrated graphics function
depend on the processor type used.
Two digital video outputs: DisplayPort 1.2 and HDMI 1.4
- supports two independent Full HD displays simultaneously 
- supports Full HD resolution at 1920 x 1200 (1080p / 60Hz)
- supports 4K UHD resolution at 3840 x 2160 (max. 2160p / 60Hz on DP or max. 30 Hz on HDMI) 
- supports Blu-ray (BD) playback with HDCP
- supports HD video plus multi-channel digital audio via a single cable.
- M.2-2260 M Slot
The M.2 2260 M slot supports M.2 SSD cards with SATA interface
It supports M.2 cards with a width of 22 mm
and a length of 42 or 60 mm (type 2242, 2260).
Cards with 80mm length (2280) are not supported.
- M.2-2230 AE Slot
The M.2 2230 AE slot provides the following interfaces:
- PCI-Express v2.0 X1
- USB 2.0
It supports M.2 cards with a width of 22 mm and a length of 30 mm. This slot is intended for Wireless LAN (Wifi), Bluetooth, GSM/UMTS cards and others. A SATA interface for SSD cards is not available here.
Audio Realtek® ALC 662 5.1 channel High-Definition Audio
Two analog audio connectors (3.5 mm) at the front panel:
1) 2-channel line out (head-phones)
2) microphone input
Digital multi-channel audio output: by HDMI and DisplayPort
- Gigabit LAN Controller
Realtek 8111G Ethernet network controller (Gigabit)
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
- Drive connectors
1x Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
With Serial-ATA power connector (onboard)
- Card Reader
Integrated card reader
Supports SD, SDHC and SDXC memory flash cards
Supports boot up from SD card
- Front Panel connectors
Audio Line-out (headphones)
2x USB 3.0
2x USB 2.0
SD card reader
Power LED (blue)
HDD LED (yellow)
- Back Panel connectors
1x HDMI connector 
1x DisplayPort connector (DP) 
4x USB 2.0
1x Gigabit LAN (RJ45)
DC-input connector for external power adapter
4-pin connector (2.54 mm pitch) supports
- external power on button
- Clear CMOS function
- +5 V DC voltage for external components
2x Perforation for optional Wireless LAN antennas
2x hole for Kensington Locks
- Other onboard connectors
1x jumper for power on after power fail (hardware solution) 
1x fan connector (4-pin) occupied by the cooling system
1x connector for CMOS battery (occupied)
- Supplied Accessories
Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
Four screws M3 x 4 mm (to mount a 2.5" storage device into the bay)
Driver DVD (Windows 64-bit)
Serial ATA cable for 2.5" drive including power cable
External 90 W power adapter with power cord
Protection cap for CPU socket (do not use if heat-pipe or fan is mounted)
- Optional Accessies:
WLN-M. WLAN module in M.2-2230 format supports IEEE 802.11ac and Bluetooth 4.0
- Environmental Specifications
Operating temperature range: 0~50 °C 
Relative humidity, non-condensing: 10~90%
- Low Power Consumption
Exemplary measurement of the power consumption:
- S3 mode: 0.81W
- Idle mode: 9.9W
- Full load: 61.5W / 79.6W (without/with graphics)
Configuration: Core i5-6600, 2x 4GB DDR4-2133, 500GB SSD, Windows 7 64 bit
- Certifications / Compliance::
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
 HDMI output supports DVI-D with optional adapter
 How to convert DisplayPort into HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either through DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
 Power on after power fail
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the DH110 also comes with a hardware-based solution. By removing Jumper JP2 (on the mainboard behind the power button) the system will start unconditionally once power is supplied.
 4K Ultra-HD resolution
A 4K-display with Ultra-HD resolution (3840 x 2160) should only be connected via DisplayPort, as only this port supports a higher refresh rate of 60Hz. Certain displays (e.g. Dell UP2414Q) however require MST mode (Multi-Stream Transport) to be enabled which sends two separate images at half resolution each to the display. These two images are then combined and put in correct order by the Intel graphics driver when in Collage mode. Please note that HBR2-mode (High Bit Rate 2) must be supported by each display to have more than one of them run at 4K resolution.
 Note on operating temperature
For high ambient temperatures over 40 °C we strongly recommend to use SSDs (supporting at least 70 °C) and rugged SO-DIMM memory modules with a temperature range of up to 95 °C.
No customer comments for the moment.