Shuttle Barebone DH270
Nowy model sprawdzonej serii DH - DH270 łączy duże możliwości obliczeniowe z kompaktową obudową. Przystosowanie do pracy w trudnych warunkach i duża liczba złączy czyni z niego solidną maszynę.
- LGA1151 dla Intel Core 6 i 7 Gen.
- Obsługa 3 monitorów HDMI
- M.2 2280 BM oraz M.2 2230 AE
- 2 x RS232
- 2 x GBIT LAN
- Praca od 0 do 50 stC
If because of space constraints the machine cannot be switched on by pressing the front power button, it can be started with a separate remote control. You will find an appropriate four-pin connector on the back panel of the PC (pitch 2.54 mm).
This machine is provided with a hardware solution to keep it permanently switched on (e.g. after a power outage). If you remove the jumper documented in the manual, the PC then starts as soon as the power supply is restored.
Multiformat card reader
At last – no more searching for missing digital camera leads. Simply insert the memory card and you can access all stored photos and videos immediately.
Goodbye cable spaghetti! Modern flat-screen TVs and large-format TFT screens can be connected to this Mini-PC with just a single thin cable. Often the audio output is also transferred in brilliant quality via the HDMI cable.
Dual network connection
In this model two gigabit network controllers ensure maximum data transmission rates via load balancing and maximum availability via the failover function.
The fastest connection to external peripheral devices available to date
The USB 3.0 connectors of this model allow for data transfer of up to 5 Gbit/s (625 MB/s). This enables external devices such as USB hard disks to be connected and run at nearly the same speed as their internal siblings. USB 3.0 is downward compatible so that also devices of previous USB generations can be hooked up.
Pre-assembled cabling saves time
The most important power and data cables are already routed and just have to inserted into the relevant components. This saves valuable time when setting up the system.
Intel chipset inside
Play it safe with the reliable chipsets from the world's largest chip manufacturer. Intel chipsets have proven themselves over many years, have been presented with awards by the trade press and offer the best possible degree of compatibility.
The Kensington Lock forms part of the anti-theft system. As with many other Notebooks, this Mini-PC can also be safely locked, ensuring long-term enjoyment from your Shuttle product.
You can rely on SSD
This is where an energy-saving "Solid State Drive" should be used. This drive technology guarantees extremely short access times, the highest data transmission rates and considerably lower energy consumption compared to conventional hard disks. SSDs have no mechanical components at all, are therefore subject to less wear and tear and consequently benefit from a longer service life.
Just 2.5" HDDs
An extremely compact PC housing offers less space for drives, that's why this Mini-PC uses slimline 2.5-inch hard disks. The advantage of this is that there's less noise, less heat generated and reduced power consumption. However small hard disks in a small housing does not have to mean less memory. Modern 2.5" HDDs are every bit as good as their 3.5" brothers.
Fan-less external power supply
A highly effective external power supply provides the Shuttle Mini-PC with its energy. And since it works without a fan, it is completely noise-free.
Optimal air flow
Warm air is transported out of the chassis by means of cleverly arranged components, which enables a large number of parts to be cooled simultaneously in the air flow. At no time can heat build up and adversely affect the stability of the system.
The interface for the fastest of memory media
Internal drives to be used inside this Mini-PC can transfer data at a speed of up to 6 Gbit/s. Hard drives thus run significantly faster and brand-new media technologies such as SSDs can use their full potential. Be sure to look for SATA 6 Gbit/s.
Black chassis made of steel
Dimensions: 190 x 165 x 43 mm (LWH) = 1.35-litre
Weight: 1.3 kg net and 2.04 kg gross
Two holes for Kensington Locks and numerous
threaded holes (M3) at both sides of the chassis
- Operation System
This system comes without operating system.
It is compatible with Windows 10 and Linux (64 bit)
Note: Windows 7 is only supported in combination with 6th generation Intel Core processors "Skylake".
For an additional note on Windows 7, please see 
- Mainboard / Chipset / BIOS
Chipset: Intel® H270 Chipset (code name "Union Point")
Platform Controller Hub (PCH) as Single-Chip-Solution
AMI BIOS in 8 Mbit EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure 
Supports Firmware-TPM (fTPM) Version 2.0
- Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, 4.74 A, max. 90 W
DC Connector: 5.5/2.5 mm (outer/inner diameter)
Remark: The DC-input of the computer supports an external power source with either 12V±5% or 19V±5%.
- Processor support
Socket LGA 1151 (H4) supports
Intel Core i7 / i5 / i3, Pentium and Celeron processors
- 6th generation, code name "Skylake"
- 7th generation, code name "Kaby Lake"
Maximum supported processor power consumption (TDP) = 65 W
14 nm process technology, up to 8 MB of L3 cache
Not compatible with Intel Xeon E3 V5 processors for socket LGA 1151 and processors with the older Socket LGA 1150.
Does not support the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller
and the graphics engine on the same die (performance features
depending on processor type)
Please refer to the support list for detailed processor support information at global.shuttle.com.
- Processor cooling
Heatpipe processor cooling with two 60 mm fans on the upper side of the chassis
- Memory support
2x SO-DIMM slot with 260 pins
Supports DDR4-2133/2400 (PC4-17066/19200) SDRAM at 1.2V
Supports maximum total size of 32 GB (max. 16 GB per module)
Supports Dual Channel mode
Supports two unbuffered DIMM modules (no ECC)
- Integrated Graphics
The features of the integrated graphics function
depend on the processor type used.
Three digital video outputs: 1x HDMI 2.0 und 2x HDMI 1.4b
- supports up to three independent displays simultaneously
- HDMI 1.4b supports 4K UHD resolution at 30 Hz (2160p/30)
- HDMI 2.0 supports 4K UHD resolution at 60 Hz (2160p/60)
- supports Blu-ray (BD) playback with HDCP
- supports HD video plus multi-channel digital audio via a single cable.
Optional analog D-Sub/VGA video output 
- 2.5" Storage Bay
1x 6.35 cm / 2.5" storage bay supports one hard disk or SSD drive
Device height: 12.5 mm (max.)
1x Serial-ATA III connector, max. 6 Gb/s (600 MB/s) bandwidth
With Serial-ATA power connector (onboard)
- Two M.2 Slots
This XPC features two M.2 expansion slots:
(1) M.2 2280 BM slot
- Interfaces: PCI-Express Gen. 2.0 X4 (max. 16 Gbit/s) and SATA v3.0 (max. 6 Gbit/s)
- supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280)
- supports SATA SSDs (BM-Key) or PCIe SSDs (M-Key)
(2) M.2 2230 AE slot
- Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0
- supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
- supports an optional WLAN card (accessory WLN-M )
Audio Realtek® ALC 662 5.1 channel High-Definition Audio
Two analog audio connectors (3.5 mm) at the front panel:
1) 2-channel line out (headphones)
2) microphone input
Digital multi-channel audio output: by HDMI
- Dual Gigabit LAN Controller
Dual network with two RJ45 ports
Used network chips:
2x Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode 
- Card Reader
Integrated card reader
Supports SD, SDHC and SDXC memory flash cards
Supports boot up from SD card
- Front Panel connectors
Audio Line-out (headphones)
2x USB 3.0 type A
1x USB 3.0 type C
SD card reader
Power LED (blue)
HDD LED (yellow)
- Back Panel connectors
1x HDMI 2.0 (supports UltraHD resolution at 60 Hz)
2x HDMI 1.4b
(with two screw holes for HDMI connector with locking screws)
Optional 1x D-Sub VGA connector (Accessory PVG01 )
4x USB 2.0
2x Gigabit LAN (RJ45)
2x RS232 serial port, 9-pin D-Sub (5/12 V, 1x RS422/RS485) 
DC-input connector for external power adapter
4-pin connector (2.54 mm pitch) supports
- external power on button
- Clear CMOS function
- 5 V DC voltage for external components
2x perforation for optional Wireless LAN antennas
2x hole for Kensington Locks (at the side)
- Other onboard connectors
1x jumper JP2 power-on-after-power-fail (hardware solution) 
1x analog VGA graphics output CN6 (2x 10-pin, 1 mm pitch) 
2x serial interface (COM) occupied by back panel connectors
1x fan connector (4 pins) occupied by cooling system
1x connector for CMOS battery (occupied)
1x audio connector (line-out/microphone, 2x 7-pin)
- Supplied Accessories
Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
VESA mount for 75/100mm standard (two metal brackets)
Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to affix VESA mount on the PC)
Four screws M3 x 4 mm (to mount a 2.5" drive into the bay)
Driver DVD (Windows 10 64-bit)
Serial ATA cable for 2.5" drive including power cable
External 90 W power adapter with power cord
Protection cap for CPU socket (do not use if heat-pipe or fan is mounted)
- Optional Accessies:
(1) WLN-M: Wireless LAN kit consisting of a M.2-2230 WLAN card, two antennas and appropriate cables. Supports IEEE 802.11b/g/n/ac in the 2.4 / 5 GHz band and Bluetooth 4.0. 
(2) PVG01: optional D-Sub VGA video output 
(3) CXP01: adapter cable for external power button
(4) PRM01: 2U rack mount front plate for two Shuttle XPC slim PCs
- Environmental Specifications
Operating temperature range: 0~50 °C 
Relative humidity, non-condensing: 10~90 %
- Certifications / Compliance::
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
 Installation of Windows 7
The Intel® 100/200 chipset series does no longer support the Enhanced Host Controller Interface (EHCI) which is the driver software for USB 2.0. The new chipset only supports the updated Extensible Host Controller Interface (xHCI for USB 3.0) which is not supported by the original Windows 7 installation disk. This means, that peripheral devices connected by USB (like keyboard, mouse and external optical drive) will not work during the Windows 7 Installation. As a solution, please add the required USB 3.0 drivers to the Windows 7 installation files - this procedure is explained in the Shuttle FAQ section at http://go.shuttle.eu/skylakewin7en.
Note: Windows 7 is only supported with processors of the 6th generation (Skylake), not with processors of the 7th generation (Kaby Lake).
 HDMI output supports DVI-D with optional adapter
 Optional D-Sub/VGA connector
The mainboard features one analog graphics port CN6 on the mainboard. This signal can be lead to the outside as a 15-pin D-Sub VGA connector at the backpanel by using an optional adapter PVG01. However doing so means one serial port (COM) less can be used at the backpanel.
The BIOS setup provides a "Power-on-after-power-fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the DH270 also comes with a hardware-based solution. By removing Jumper JP2 (on the mainboard behind the power button), the system will start unconditionally once power is supplied.
 Teaming Mode
The teaming function allows you to group both available network adapters together to function as one single adapter. The benefit of this approach is that it enables load balancing and failover.
Driver download: https://downloadcenter.intel.com/download/21642
 Serial Ports
This PC features two serial RS232 ports with 9-pin D-Sub connectors at the back panel. The left COM port (COM1) can also be configured as RS422 and RS485 in the BIOS setup. The COM ports are protected by black plastic caps.
Pin 9 of the D-Sub COM-Port is a multi-functional signal. Based on the Jumper JP1 configuration on the mainboard, it can be configured as Ring Indicator (RI) or external power supply with a voltage level of either 5 V or 12 V. Each COM port can be configured separately. The maximum current is 500 mA per connector.
 Optional Wireless LAN module
This Shuttle XPC slim Barebone supports the optional Shuttle XPC Accessory WLN-M which consists of a M.2-2230 card with IEEE 802.11ac and BT4.0 functionality and two external antennas with appropriate antenna cables.
 Notice - operating temperature
For ambient temperatures over 40 °C we strongly recommend to use SSDs (supporting at least 70 °C) and rugged SO-DIMM memory modules with a temperature range of up to 95 °C.
No customer comments for the moment.