Barebone Shuttle XHC60J
XC60J to produkt skierowany do specjalistycznych zastosowań, oferujący 8 portów COM. Sprzęt jest oparty na procesorze Celeron J3355 i może pracować w trybie 24/7 w temperaturze do 40stC.
- 8 portów COM (RS232)
- 6 x USB
- zewn. zasilacz
- praca 24/7 do 40stC
- HDMI i VGA
- port M.2
Goodbye cable spaghetti! Modern flat-screen TVs and large-format TFT screens can be connected to this Mini-PC with just a single thin cable. Often the audio output is also transferred in brilliant quality via the HDMI cable.
Low energy consumption
Thrift is a virtue. In terms of power consumption this Mini-PC sets an example. It is not just good for the environment but for your pocket, too.
Fanless and whisper-quiet
The fanless technology used in this PC means it is incredibly quiet. Doing away with these mechanical components also reduces the number of wearing parts, making the machine more durable and stable.
You can rely on SSD
This is where an energy-saving "Solid State Drive" should be used. This drive technology guarantees extremely short access times, the highest data transmission rates and considerably lower energy consumption compared to conventional hard disks. SSDs have no mechanical components at all, are therefore subject to less wear and tear and consequently benefit from a longer service life.
The Kensington Lock forms part of the anti-theft system. As with many other Notebooks, this Mini-PC can also be safely locked, ensuring long-term enjoyment from your Shuttle product.
Fan-less external power supply
A highly effective external power supply provides the Shuttle Mini-PC with its energy. And since it works without a fan, it is completely noise-free.
Just 2.5" HDDs
An extremely compact PC housing offers less space for drives, that's why this Mini-PC uses slimline 2.5-inch hard disks. The advantage of this is that there's less noise, less heat generated and reduced power consumption. However small hard disks in a small housing does not have to mean less memory. Modern 2.5" HDDs are every bit as good as their 3.5" brothers.
Optimal air flow
Warm air is transported out of the chassis by means of cleverly arranged components, which enables a large number of parts to be cooled simultaneously in the air flow. At no time can heat build up and adversely affect the stability of the system.
The fastest connection to external peripheral devices available to date
The USB 3.0 connectors of this model allow for data transfer of up to 5 Gbit/s (625 MB/s). This enables external devices such as USB hard disks to be connected and run at nearly the same speed as their internal siblings. USB 3.0 is downward compatible so that also devices of previous USB generations can be hooked up.
Communication in the fast lane
The integrated gigabit LAN chipset opens up completely new possibilities for communication with no restriction on the speed of data transfer. Say goodbye to information bottlenecks, whether in the company network or for home Internet access.
- Fanless and silent
Completely fanless, virtualy noiseless
Passive cooling through convective heat transfer
Perfect to be used in noise-sensitive environments
Fanless means less dust and thus virtually no maintenance required
Slim 3-litre chassis, colour: black
Dimensions: 238 x 200 x 72 mm (LWH) = 3.4-litre
Open front - without covers for easy access to the front panel connectors
- Operation Position
2) Vertically with optional stand PS01
3) Vertically with optional VESA mount PV02
(e.g. VESA-mounted behind an appropriate monitor)
In vertical position, the front USB ports should point upwards.
Ventilation holes must not be blocked to ensure sufficient cooling.
- Operation System
This system comes without operating system.
It is compatible with
- Windows 10 (64-bit)
- Linux (64-bit) Kernel 4.8 or higher
Note: Windows 7, 8 and 8.1 are not supported
Intel® Celeron® Processor J3355, Dual Core
CPU clock frequency: 2.0 GHz, max. Turbo frequency: 2.5 GHz
Apollo Lake platform, Goldmont architecture, 14 nm structure
CPU cores / Threads: 2 / 2
L2 Cache: 2 MB
Thermal Design Power (TDP): 10 W
Supports AES-NI, VT-x (EPT), VT-d, Secure Boot
SOC design with integrated graphics processor, no chipset required
- Integrated Graphics
The Graphics Processing Unit (GPU) is integrated in the processor
Intel® HD Graphics 500 (9th Gen), graphics frequency: 250~700 MHz
Supports DirectX 12, OpenGL 4.3, OpenCL 1.2, OpenGL ES 3.0, Intel Quick Sync Video, Intel Clear Video (HD)
Execution Units (EU): 12
Video outputs (Resolution):
- HDMI 1.4b: max. 1920 x 1200 @ 60 Hz oder 3840 x 2160 @ 30 Hz
- D-Sub (VGA): max. 1920 x 1200 resolution @ 60 Hz
Supports two displays simultaneously via HDMI and VGA port.
- UEFI Firmware
16 MB Flash ROM with AMI's Aptio UEFI BIOS Firmware
Based on the Unified Extensible Firmware Interface (UEFI) 
Supports Power fail resume / AC power on state / always on / always off
Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
Supports boot up from external flash memory cards
Supports embedded Firmware TPM v2.0 (fTPM)
2x 204-pin SO-DIMM slot
Supports DDR3L-1600/1866 (PC3-12800/14900) SDRAM at 1.35V
Supports Dual Channel mode
Supports max. 8 GB per DIMM
Maximum total size: 8 GB (either 1x 8 GB or 2x 4 GB)
Supports two unbuffered DIMM modules (no ECC)
Note: This mainboard does only support 1.35 V DDR3L memory modules.
DDR3L has a lower operation voltage as compared to DDR3
- Bays for Hard disk drive/SSD
Combined 2.5"/3.5" bay supports one SATA storage drive
- 3.5" SATA hard disk drive or
- 2.5" SATA hard disk drive or
- 2.5" SATA SSD drive
Serial ATA III Interface with up to 600 MB/s transfer speed
One pre-installed SATA cable (data / power)
Supports Unified Extensible Firmware Interface (UEFI)
- M.2 expansion slot for SSD card
M.2 2280 slot
Interfaces: PCI-Express Gen. 2.0 X4 (max. 16 Gbit/s) and SATA v3.0 (max. 6 Gbit/s)
Supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280)
Supports SATA SSDs (BM-Key) or PCIe SSDs (M-Key)
- Integrated Audio
Realtek ALC662 Audio Codec
Two analog audio connectors (3.5 mm):
1) Line out (headphones)
2) Microphone input
- Wired Network
RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/s.
Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
- Optional WLAN
M.2-2230 slot for optional WLAN kit "WLN-M"
- LEDs and Buttons
Power LED (blue)
HDD LED (yellow)
- Front Panel Connectors
Audio Line-out (head phones)
2x USB 3.0
2x USB 2.0
3x RS232 COM ports
- Back Panel Connectors
HDMI 1.4b digital video and audio output
D-Sub/ VGA analog video output (15-pin)
2x USB 2.0
Gigabit network (LAN, RJ45)
5x RS232 serial port, 9-pin D-Sub (support of an auxiliary voltage of 5 / 12 V
and one port is switchable to RS422 / RS485)
DC input for external power adapter
2x perforation for external WLAN antennas
- Power-on Jumper
Jumper JP5 for power on after power fail (hardware solution) 
- Power Supply
External 65 W AC/DC power adapter (fanless)
AC Input: 100 ~ 240 V AC, 50 ~ 60 Hz
Automatic voltage adjust
DC Output: 19 V / 3.42 A
DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
Remark: the DC-input of the computer supports an external power source
with either 12 V ± 5 % (65 W) or 19 V ± 5 % (65 W).
- Supplied Accessories
Quick Installation Guide
Driver DVD (Windows 64-bit)
External 19V / 65 W power adapter with power cord
Pre-installed cables for a SATA drive, screws for installation
- Optional Accessies:
- Vertical stand (PS01)
- VESA mount (PV02)
- WLAN kit with two external antennas (WLN-M)
- 24/7 Nonstop Operation
This device is approved for 24/7 permanent operation.
- Free air circulation around the PC must be guaranteed.
- Ventilation holes must be kept clear.
- Any installed disk must also be approved for permanent
operation by its manufacturer
- Environmental Spec
Operating temperature range: 0 ~ 40 °C
Relative humidity range: 10 ~ 90 % (non-condensing)
- Certification and Compliance
EMI: FCC, CE, BSMI, RCM, VCCI, R&TTE
Safety: CB, BSMI, ETL, CCC
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD) and
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
 UEFI-Firmware (versus BIOS)
Just as with many modern PCs, the Shuttle XPC slim Barebone XC60J does away completely with a BIOS, but uses a pure UEFI firmware instead. The terms UEFI firmware and BIOS are widely used synonymously, but hardware initialising is now performed by the UEFI. Users might not even notice, but the operating system must be installed and executed in UEFI mode. UEFI creates a GUID Partition Table (GPT) on the system partition instead of a Master Boot Record (MBR). A PC running pure UEFI firmware alone must have a 64-bit operating system installed.
 Power-On after Power-Fail
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the Shuttle XPC slim Barebone XC60J also comes with a hardware-based solution. By removing Jumper JP5, the system will start unconditionally once power is supplied.
No customer comments for the moment.